Descripción
- Permite la comunicación con dispositivos de apple iPhone y iPad
- Módulo HM10 con tarjeta adaptadora a header estándar
- Funcionamiento a 3.3 y 5 volts de alimentacion
- Interfaz UART 3.3 Volts
- Comunicación con microcontrolador a través de interfaz serial estándar (UART)
- Basado en el chip CC2541
- Módulo completamente compatible con el estándar bluetooth V4.0 BLE
Dimensiones y peso
- Peso del producto: 3.63 gramos
- Tamaño del producto:
- Largo: 4.3 cm
- Ancho: 1.6 cm
- Alto: 0.7 cm
- Peso del paquete: 3.64 gramos
- Tamaño de paquete:
- Largo: 5.3 cm
- Ancho: 2.6 cm
- Alto: 0.7 cm
Resumen de comandos módulo Bluetooth HM-10
- AT (Test command)
- AT+BAUD (Query/Set Baud rate)
- AT+CHK (Query/Set parity)
- AT+STOP (Query/Set stop bit)
- AT+UART (Query/Set uart rate,parity, stop bit)
- AT+PIO (Query/Set PIO pins status Long command)
- AT+PIO (Query/Set a PIO pin sttus Short command)
- AT+NAME (Query/Set device friendly name)
- AT+PIN (Query/Set device password code)
- AT+DEFAULT (Reset device settings)
- AT+RESTART (Restart device)
- AT+ROLE (Query/Set device mode, Master or Slave)
- AT+CLEAR (Clear remote device address if has)
- AT+CONLAST (Try to connect last connect succeed device)
- AT+VERSION (Show software version information)
- AT+HELP (Show help information)
- AT+RADD (Query remote device address)
- AT+LADD (Query self address)
- AT+IMME (Query/Set Whether the device boot immediately)
- AT+WORK (if device not working, start work, use with AT+IMME command)
- AT+TCON (Query/Set Try to connect remote times)
- AT+TYPE (Query/Set device work type, transceiver mode or remote mode)
- AT+START (Switch remote control mode to transceiver mode)
- AT+BUFF (Query/Set How to use buffer data, Duing mode switching time)
- AT+FILT (Query/Set device filter when device searching) A
- T+COD (Query/Set Class of Device. eg: phone, headset etc.)
Valoraciones
No hay valoraciones aún.